Translate
Default
English
Español
Français
User Access
copper top
« Back To Roofers Talk
Viewing 3
replies - 1 through 3
(of 3 total)
Author
Posts
February 26, 2014 at 5:46 a.m.
copperman
Made this top for a chimney in Tennessee. We did a shake job there 2 years ago and the chimney was taking on water from the top so we covered it and did some tuck pointing.
March 10, 2014 at 1:44 p.m.
vickie
Wow Nice work.
February 26, 2014 at 8:52 p.m.
copperman
Yes it was heavy and up a 32 ft. ladder. we built a wood frame around the chimney and tapconed it to the stone. Covered the wood that shows from the bottom. The chimney was 3 inches out of square and had a 3 inch bow on one side. That made it fun to make and install.
February 26, 2014 at 5:57 a.m.
Lefty1
That was fun getting into place.
Viewing 3
replies - 1 through 3
(of 3 total)
You must be logged in to reply to this topic.
Translate
Default
English
Español
Français
User Access